For those who’re planning to replace the distributor on a Honda Accord, it’s actually necessary to know the model year and engine measurement because Honda modified the process frequently. From 2003 onward, the Accord has had distributorless methods, however from 2000 to 2002, all Honda Accords had distributors. In 1999 and earlier, the Accord had each distributor and distributorless systems.

1995 and Earlier Honda Accord Distributor Removal and Installation Instructions

1. Follow the cables from the spark plugs leading to the distributor on the engine block. Take away spark plug wires from distributor cap and quantity them for re-set up in proper order later.
2. Put labels on and disconnect the vacuum hoses, the primary wire and the high rigidity wire. Label and disconnect any exterior wiring connectors on the distributor, utilizing a screwdriver.
3. Unbolt the mounting bolt or bolts with a wrench and pull the distributor out of the cylinder head. The variety of bolts varies in response to the model year.
4. Install a frivolously greased new O-ring on the distributor shaft. It’s essential to buy a brand new one when putting in a brand new distributor. Match the Honda Accord distributor in place. The half number is 83674N from Parts Train, however different stores and manufacturers use completely different half numbers.
5. Bolt the mounting bolts with a wrench, hand-tightening them lightly. Reattach the external wiring, hoses and spark plug wires. Tighten the distributor bolts securely.